Ubiquiti Networks UVC-Dome Guia do Utilizador

720p Indoor IP Camera with InfraredModel: UVC-Dome

Connecting Power over Ethernet1. Connect the other end of the Ethernet cable to one of the following: • PoE Adapter Connect the UniFi Video Camera

3. Connect the Power Cord to the power port on the PoE Adapter. Connect the other end of the Power Cord to a power outlet.UniFi VideoThe UniFI Video

Camera Configuration InterfaceIf you have not yet installed UniFi Video, or if you plan to use the camera as a stand-alone camera, you can access the

5. The Main screen will appear and you should see a live video stream from the camera.Note: If you need to change the camera network settings (DHCP/S

SpecificationsUniFi Video Camera DomeDimensions 111 x 96 x 96 mm (4.4 x 3.8 x 3.8") Weight 178 g (6.28 oz.)Ports (1) 10/100 Ethernet PortSensor ¼

Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W

Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de

DisclaimerEXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE

NoteSome countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You

Industry CanadaThis Class A digital apparatus complies with Canadian CAN ICES-3(B).To reduce potential radio interference to other users, the antenna

IntroductionThank you for purchasing the Ubiquiti Networks™ UniFi® Video Camera Dome. This Quick Start Guide is designed to guide you through the inst

RoHS/WEEE Compliance StatementEnglishEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging

EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt

Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal

Latviski [Latvian]Ar o UBIQUITI NETWORKS deklar , ka UBIQUITI NETWORKS device, atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist

www.ubnt.com©2013-2014 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, TOUGHCab

Hardware OverviewMicrophoneFocus RingWide Angle LensFlange NutMounting SleeveAlignment NotchCamera Body

Power LEDReset ButtonEthernet LEDEthernet PortmicroSD SlotReset24V 0.5A POEM/N: UVC-DomeVideo CameraLEDsEthernet The Ethernet LED will light st

Installation 1. Cut a 70 mm (2.75") diameter mounting hole in the ceiling tile:a. Remove a ceiling tile.b. Remove the adhesive Mounting Templa

*640-00070-05*640-00070-053. Insert the Mounting Sleeve into the ceiling tile and securely attach the Flange Nut.4. Feed an Ethernet cable through t

5. (Optional) Insert a microSD card into the microSD Slot until it locks into the slot.Reset24V 0.5A POEM/N: UVC-DomeVideo Camera6. Connect th

7. Line up the alignment arrow on the camera bezel with the Alignment Notch on the Mounting Sleeve.8. Insert the Camera Body into the Mounting Sleev

10. Set the ceiling tile back into place.11. Remove the protective cover from the camera lens.12. Aim the camera in the desired direction.