Ubiquiti-networks UniF AP AC Manual do Utilizador descarregar pdf (Página 6)

Hardware Installation

The UniFi AP can be mounted on the wall or ceiling. Perform

the steps for the appropriate installation:

Wall Mount

1. Position the Mounting Bracket at the desired location on

the wall with the cable feed slot pointed towards the floor.

2. Use a pencil to mark the four mounting holes. Use a 6 mm

drill bit to drill the mounting holes.

Top

Optional 25 mm Hole for

Ethernet Cable Feed through Wall

3. Follow the instruction for your type of Ethernet cable feed:

- Feeds Through the Wall Cut or drill a circle

approximately 25 mm in diameter, just below the

bottom center of the Mounting Bracket (as shown

above). Then feed the CAT5/6 cable through the hole.

- Feeds Along the Mounting Surface Remove the

Cable Feed Plug on the side of the UniFi AP.

*640-00076-04*

640-00076-04

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Sem comentários

Ubiquiti-networks UniF AP AC Manual do Utilizador Página 6