Ubiquiti Networks airFiber Guia do Utilizador descarregar pdf (Página 23)

Chapter 1: Network Tab airFiber

AF-5X User Guide

Ubiquiti Networks, Inc.

Chapter 1: Network Tab

The Network tab allows you to configure settings for the

management network.

There are two ways to access the airFiber Configuration

Interface:

• Management Port Enabled by default. Use a direct

connection to the Management port for out-of-band

management.

• In-Band Management Enabled by default. In-band

management is available through the local Data port or

the Data port at the other end of the link.

The Management port and in-band management share

the default IP address of 192.168.1.20.

Change To save or test your changes, click Change.

A new message appears. You have three options:

• Apply To immediately save your changes, click Apply.

• Test To try the changes without saving them, click

Test. To keep the changes, click Apply. If you do not

click Apply within 180 seconds (the countdown is

displayed), the AF-5X times out and resumes its earlier

configuration.

• Discard To cancel your changes, click Discard.

Management Network Settings

In-Band Management Enabled by default. In-band

management is available through the local Data port or

the Data port at the other end of the link.

Note: If In-Band Management is enabled, ensure that

each airFiber radio of a link has a unique IP Address. If

the airFiber radios use the same IP Address, then you

may lose access via the Data ports.

Management IP Address The AF-5X can use a static IP

address or obtain an IP address from its DHCP server.

• DHCP Keep the default, DHCP, to use DHCP reservation

on your router to assign a unique IP Address. The local

DHCP server assigns a reserved IP address, gateway IP

address, and DNS address to the AF-5X.

Note: If you select the DHCP option, ensure that

you use DHCP reservation because if you do not

know the IP address, then the only way to manage

the AF-5X is to reset the AF-5X to its factory default

settings. (Press and hold the Reset button for

more than five seconds.) Its default Management IP

Address is reset to 192.168.1.20.

- DHCP Fallback IP Specify the IP address the AF-5X

should use if a DHCP server is not found.

- DHCP Fallback Netmask Specify the netmask the

AF-5X should use if a DHCP server is not found.

• Static Assign static IP settings to the AF-5X.

Note: IP settings should be consistent with the

address space of the AF-5X’s network segment.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 49 50

Comentários a estes Manuais

Sem comentários

Ubiquiti Networks airFiber Guia do Utilizador Página 23

Comentários a estes Manuais

Manuais e produtos relacionados com Pontos de acesso WLAN Ubiquiti Networks airFiber